What is The Easiest Way to Clean Tile Grout?

Every homeowner wants their tile grout to be in good condition but it becomes difficult to maintain it. Grout easily gets attracted to dirt particles. When you get down to clean your floor you will see a lot of loose particles and dirt accumulated in your tile grout. These contaminants can damage your flooring soon. You may apply many chemicals to clean your grout but it is very important to know that these harmful chemicals can damage your flooring. It is better to use a safe solution to clean grout. This will even increase the life of your tile flooring. There are many ways through which you can clean your tile grout thoroughly. Below mentioned is the easiest and effective method.

Tile and Grout Cleaning
Tile and Grout Cleaning

Simple Method For Cleaning Tile Grout

Step 1: Clean The Area

In the first step, all you have to do is clean the area by removing all the dirt and grime accumulated in your surface. Before you start cleaning your grout you will find a lot of grease and dirt on it which makes it look ugly. Take some hot water and spray it on your grout, using a stiff bristle brush scrub it properly. Follow the proper method and clean all the grout lines thoroughly. In this method, you will be able to remove all the dirt particles and then the area will be ready to apply other cleaning solution. 

Step 2: Prepare The Solution

In the next step, prepare the cleaning solution. To make this solution take some baking soda and hydrogen peroxide. Baking soda and hydrogen peroxide are one of the best remedies for cleaning the grout. They are very safe and are easily available in every home. Take one part of hydrogen peroxide and 2 parts of baking soda and if at all you find grease in your grout then add a few drops of dish soap to your solution. Dish soap has got such properties which can remove all the stubborn grease stick to your tile grout. After that, stir the solution and you are ready to use it. 

Step 3: Apply The Solution

To apply the solution take a spoon. With the help of spoon pour the solution on grout lines. Let the solution be on the grout lines for about 10 to 15 minutes. You have to let the solution stay on the grout lines for some time so that it goes deeper into the grout lines and all the dirt comes out of it. For shining grout, this is very necessary. 

Step 4: Scrubbing

Afterwards, take a brush and start scrubbing the grout lines to remove all the dirt. Many homeowners do not scrub the solution on the tiles after applying and directly wipe the floor. This is the reason why still the dirt and grease remains in the grout. Lift all the dirt by using a brush, use the proper method and make sure all the dirt along with the solution is coming out of your grout lines. 

Step 5: Rinse The Tile Grout

In the end, rinse the tile grout properly. You can take some water and add a few drops of dish detergent to it and later using sponge clean the floor. After cleaning the floor with a sponge, take a fresh and dry cloth. Wipe the floor with a fresh cloth later to dry it. Use the floor once it is completely dried. If you didn’t find the desired result then you can follow the procedure again as sometimes you may not receive the 100 % result in one attempt.

Do Not Forget To Take The Help Of Professionals

If your tile grout is very filthy and you want it to get it cleaned by the professional tile cleaners then consider hiring Zenith Cleaning Services. We offer professional tile grout cleaning in brisbane. All our cleaners are well trained and certified to perform the grout cleaning job. We use an eco-friendly solution in our grout cleaning procedure. We even offer same-day grout cleaning service. To book our service call us on 0488 852 736 or you can even fill the contact us form which you will find on our company website.

Suggested Blog Source: –